h4

bathroom remodel cost

FireplaceK.

Our last blog post was about the first step in our sunroom remodeling project: Painting Once we put new paint on the walls and ceiling, it was clear that something needed to be done with the fireplace. As the shingles are more of an accent, we put them on the upper dormer, chose a medium blue to paint the brick on the bottom, selected a creamy yellow siding, and kept the trim white so the colors popped. A flat paint would not have done justice to the ceiling and all the hard work we put into re-finishing it.

I have found that after receiving their new mantel, many people have questions and want advice on the best ways to go about finishing a fireplace mantel. Just a couple more pieces of drywall. Typically this decision is made before buying the mantel as different wood types and materials are used in producing a mantel based on if it will be painted or stained.fireplace remodel

Many people purchase an unfinished fireplace mantel so they can paint or stain it to match the décor of their home rather than having the factory paint or stain it one of their standard colors. Once we had the fireplace completely resurfaced, it was time to add trim and molding pieces to design the fireplace the way we wanted it to look.

Looks good, but lots of problems with windows, sloped floors and a drafty open fireplace. We’ll use a 15 pane door with textured glass – just like the 1st floor bathroom door. The designs available in the market can be very different, some fireplaces have mantle surface like the traditional ones.fireplace remodel

Because I was installing the stone inside the house, I didn’t need to put up a vapor barrier and could put the metal lathe directly on the drywall after patching it. Metal lathe is nasty, nasty stuff and will cut you in half if you are not careful. I used a router to add some detail to the top and then cut the three pieces.fireplace remodel